1. Orders and acceptance
These Terms and Conditions apply to quotations, orders and purchases of goods and services from Glen Mills, subject to applicable law and any different terms expressly agreed to by Glen Mills in writing. Orders are subject to acceptance by Glen Mills. A request for information or a quotation does not by itself confirm an order.
Review your quotation and order confirmation for the equipment, configuration, quantities, services, pricing and quotation validity. A separately signed agreement controls over these terms to the extent of a conflict. Specific terms expressly accepted by Glen Mills in a written quotation or order confirmation control over general terms on the same subject.
Glen Mills objects to additional or conflicting terms in a customer purchase order or other customer document unless expressly accepted by Glen Mills in writing, subject to applicable law. An acknowledgment of receipt, delivery or performance does not by itself constitute express agreement to those additional terms. Changes to an accepted order require written agreement.
2. Prices, payment and overdue accounts
Prices, quotation validity, payment terms and any required deposit will be stated in your quotation, order confirmation or invoice. Unless expressly included, shipping, handling, insurance, taxes, duties and tariffs are additional. Payment is due according to the terms agreed to in writing.
Notify Glen Mills promptly in writing of an invoice dispute, identifying the amount and reason. The parties will work to resolve the dispute; undisputed amounts remain payable when due. For overdue undisputed amounts, Glen Mills may suspend further shipments or services after written notice and a reasonable opportunity to bring the account current, subject to applicable law. Resulting schedules may be adjusted reasonably.
Any late-payment charges or collection expenses must be authorized by the written agreement and applicable law. No fixed late-payment rate or collection charge is imposed by this page alone.
3. Credit card processing fee
Glen Mills reserves the right to charge a 3% credit card processing fee on amounts paid by credit card, where permitted by applicable law and card-network rules. Any fee will not exceed our actual cost of processing the credit card payment or any lower applicable legal or card-network limit. If a lower limit applies, the fee will be reduced accordingly.
We will disclose the applicable fee and its amount before you incur the charge and before processing your payment, and show it separately on your receipt. This fee does not apply to debit or prepaid cards, even if processed as credit. Contact Glen Mills before payment to discuss available payment methods.
4. Tariffs, duties and taxes
Glen Mills reserves the right to collect applicable tariffs, import duties and related government-imposed charges associated with your order. Unless expressly included in the written quotation or order confirmation, these charges are additional to the quoted price.
If a new or increased tariff or duty affects an order before shipment, Glen Mills may pass through the applicable additional cost, subject to applicable law and the written terms of the order. We will notify you of the amount and basis of any adjustment before collecting it. Any estimate is subject to the charges actually applicable to the order; we will not collect the same charge twice.
5. All sales are final
All sales are final. Orders may not be canceled, and products may not be returned or exchanged for a refund or credit, except as required by applicable law or expressly authorized by Glen Mills in writing. Do not ship a product back without written authorization and return instructions.
This policy does not limit any applicable written warranty or any rights or remedies that cannot lawfully be excluded, including those relating to defective, damaged or incorrectly supplied goods. Contact Glen Mills promptly if there is a problem with your order.
6. Shipping, delivery and risk of loss
Shipping arrangements, freight charges, delivery location, unloading responsibilities, insurance and the point at which risk of loss transfers will be specified in the written quotation or order confirmation. Any agreed shipping term applies as stated in that document. Where a matter is not expressly agreed, applicable law governs; these terms do not impose a blanket shipping-point or destination rule.
Delivery dates are estimates unless expressly guaranteed in writing. Scheduling depends on receipt of agreed deposits, required information and approvals. Partial shipments require agreement where they change the customer's obligations. A customer-requested delivery postponement may result in reasonable storage, handling or redelivery charges only as agreed in writing and permitted by law.
Inspect deliveries promptly. Record visible damage or shortages on the carrier's delivery receipt when possible, retain packaging and photographs, and notify Glen Mills promptly so we can help address the issue. These steps do not waive rights concerning concealed damage, defects or other remedies that cannot lawfully be excluded.
7. Installation, commissioning and services
Scope of services
Equipment prices do not include installation, commissioning, operator training, preventive maintenance or other on-site services unless expressly included in a written quotation or order confirmation. Commissioning means the initial start-up and operating checks described in the agreed service scope. The quotation or service agreement will identify the work included, charges, scheduling requirements and any agreed completion criteria. Qualification, validation, calibration certificates and regulatory documentation are included only when expressly stated in writing.
Customer site preparation
Before a scheduled visit, the customer must have the equipment and agreed accessories available at the installation location and complete the preparations specified for that equipment. The customer is responsible for safe access, suitable space and floor capacity, required utilities and connections, ventilation, and any necessary unloading, rigging or lifting arrangements, unless the written service scope states otherwise. Building alterations, foundations, electrical or plumbing work, removal of existing equipment and waste disposal are excluded unless expressly included.
Safe working conditions and assistance
The customer must provide a safe working area, disclose known hazards and applicable site requirements before the visit, and arrange any required access permissions, permits and safety inductions within its control. The customer must make an authorized contact and appropriate operating personnel available for the agreed work and training. Materials supplied for start-up or testing must be suitable for the equipment and accompanied by relevant safety information. Glen Mills and its service providers remain responsible for their own applicable safety obligations. Work may be paused if conditions are unsafe or agreed preparations are incomplete.
Scheduling and additional charges
Service dates are arranged by agreement and depend on equipment availability, site readiness and personnel availability. If customer-controlled conditions delay or interrupt a visit, or require an additional visit, Glen Mills may adjust the schedule and charge reasonable additional labor, travel, accommodation, waiting time and related expenses in accordance with the written quotation or service agreement. The basis for additional charges will be disclosed, and additional work will require written authorization before it proceeds. Any rescheduling or cancellation charges must be stated in the written service agreement and remain subject to applicable law. This does not create a right to cancel an equipment order under the final-sales policy.
Service personnel
Glen Mills may arrange for qualified third-party service providers to perform agreed work. The written service scope will identify any work that must be performed separately by the customer's qualified contractors.
Completion and commissioning records
At the conclusion of the visit, the work performed, checks completed and any outstanding items will be recorded in a service or commissioning report for review with the customer's authorized representative. Minor outstanding items that do not affect safe operation or agreed essential functions may be listed with an agreed plan for resolution. A report does not waive applicable warranty rights or remedies. If commissioning cannot be completed because the site is not ready or required customer materials or personnel are unavailable, Glen Mills may document the work actually performed, reschedule the remaining work and invoice performed work and applicable agreed costs. Unperformed commissioning is not automatically deemed completed.
Application results
Services will be performed with reasonable care and skill. A particular processing result, production rate, particle size, regulatory qualification or other application outcome is included only when expressly agreed in writing with applicable test conditions and acceptance criteria. Testing results relate to the samples, equipment settings and conditions used and may vary with other materials or operating conditions. This provision does not reduce express equipment specifications, agreed performance commitments, applicable written warranties or rights that cannot lawfully be excluded.
8. Testing, samples and service returns
Agree the work before shipment
Contact Glen Mills before shipping material or equipment for testing, repair, evaluation or processing. The written scope should identify the requested work, sample quantity, equipment condition, charges if any, and any agreed sample return or disposal arrangements. Free feasibility testing remains free within the scope agreed with Glen Mills; paid analysis, processing, repair or other additional services require a separate written agreement.
Safe materials and packaging
Disclose the material's identity, known hazards, prior equipment exposure and relevant safety information, including safety data sheets where applicable, before shipment. Obtain written acceptance before sending hazardous, infectious, radioactive or otherwise restricted material. Equipment sent for service must be safely cleaned and decontaminated as required for its prior use, with any requested declaration of condition. Package and label shipments appropriately and follow the agreed shipping instructions.
Glen Mills may decline a shipment or pause work where safety information is missing, the shipment differs from what was agreed, or safe handling cannot be established. Any additional cleaning, specialist handling, return shipping or disposal arrangements and associated charges will be agreed in writing, subject to applicable law.
Diagnostics and remaining samples
Inspection or diagnostic charges, including where no covered defect is found, apply only when disclosed and authorized in advance. Samples may be altered or consumed during agreed testing or processing. Confirm any need to retain or return samples before work begins; storage periods, return freight and lawful disposal will follow the written scope. Glen Mills will not treat submission of a sample as permission for unrelated use or publicity.
9. Product use, warranties and claims
Review specifications and application requirements with Glen Mills before ordering. Equipment must be installed, operated and maintained in accordance with its instructions and applicable safety requirements. The customer is responsible for selecting suitable operating conditions, providing qualified personnel and using appropriate safeguards.
Any applicable warranty, its duration, coverage, exclusions and claim remedies are governed by the written warranty supplied with the product or expressly agreed to for the order, together with applicable law. This page does not create a uniform warranty period for every product or service, or replace applicable written warranty commitments.
Report a suspected defect promptly to Glen Mills with the model, serial number, purchase information and a description of the issue. Allow a reasonable opportunity for inspection and follow the agreed service instructions before returning equipment. Non-warranty repairs, parts, travel, freight and diagnostic work require disclosure and written authorization of applicable charges before the work proceeds. Nothing here automatically excludes an otherwise covered claim because the customer has contacted another service provider.
10. Confidential information and customer data
Each party will use reasonable care to protect the other party's nonpublic technical and commercial information disclosed for an order or service and will use it only to evaluate, supply, perform or support the agreed work. Disclosure is limited to personnel and service providers who need the information and are subject to appropriate confidentiality obligations, or where required by law.
These obligations do not cover information that is public without a breach, already lawfully known, independently developed, or lawfully received without a duty of confidence. Where legally permitted, a party required to disclose confidential information will give reasonable notice so the other party may seek protection. A separately agreed confidentiality agreement controls if its terms differ.
The customer must have the right to provide any submitted data, samples, specifications or other materials. Each party will handle personal data in accordance with applicable law and agreed instructions. Glen Mills will not use the customer's name, logo, confidential results or project as a public reference without permission. Confidentiality obligations continue after completion of the order for as long as the information remains protected under these terms or applicable law.
11. Documents, software and intellectual property
Each party retains its pre-existing intellectual property. The customer retains ownership of its supplied materials, confidential information and data. Supplying equipment, advice, drawings, software or documents does not transfer ownership of underlying intellectual property unless expressly agreed in writing.
The customer may use supplied documents and service reports for the agreed equipment operation, internal project evaluation and other purposes identified in the written scope. Third-party software remains subject to its applicable license terms, which must be provided or identified before acceptance. Ownership and permitted use of commissioned designs, custom software, newly developed methods or other project-specific deliverables must be addressed in the written agreement before work begins.
12. Events beyond reasonable control
Neither party is responsible for a delay or failure to perform to the extent caused by events beyond its reasonable control that it could not reasonably avoid or overcome, including natural disasters, fire, war, government restrictions, major transportation interruptions or serious supply disruptions. The affected party must notify the other promptly, explain the expected effect and take reasonable steps to reduce the disruption.
Schedules may be extended reasonably for the affected work. If the disruption continues, the parties will discuss a revised schedule or a written resolution for the affected portion of the order, including treatment of completed work, deposits and unavoidable commitments, subject to applicable law. This section does not excuse payment for goods already delivered or services already performed, or permit retroactive charges for work not supplied.
13. Export controls and lawful use
Orders and shipments are subject to applicable export controls, sanctions, import requirements and any required authorizations. The customer must provide accurate destination, end-user and end-use information when requested and must not export, re-export, transfer or use supplied goods, software or technology contrary to applicable law.
Glen Mills may withhold or suspend an affected shipment or service where a required authorization is unavailable or performance would be unlawful. We will notify the customer and address any affected order, payment or unperformed work in accordance with the written agreement and applicable law. Neither party is required to perform an unlawful act.
14. Responsibility and limitations of liability
Each party remains responsible for its own contractual obligations and applicable legal duties. The customer should maintain insurance appropriate to its equipment, facility, materials and operations.
For commercial transactions, to the extent permitted by applicable law and unless otherwise expressly agreed in writing, Glen Mills' aggregate liability arising from an order is limited to the total price paid or payable under that order. Subject to the same qualifications, Glen Mills is not liable for indirect, special or consequential losses, including lost profits, lost production, business interruption or loss of business opportunities.
These limitations do not apply to fraud, gross negligence, willful misconduct, liability for personal injury or death, or any other liability that applicable law does not allow to be excluded or limited. They do not override mandatory statutory remedies or the customer's right to any repair, replacement, refund or other remedy that must remain available by law. No shortened period for bringing claims is imposed by this page.
15. New Jersey law and jurisdiction
These Terms and Conditions and transactions with Glen Mills are governed by the laws of the State of New Jersey, without regard to its conflict-of-laws rules. Subject to any mandatory applicable law, disputes arising from these terms or transactions shall be brought exclusively in the state courts located in New Jersey or, where federal jurisdiction exists, the federal courts located in New Jersey. The parties consent to the jurisdiction of those courts.
The United Nations Convention on Contracts for the International Sale of Goods does not apply to transactions governed by these terms, to the extent that its exclusion is permitted by applicable law.
Nothing in these terms excludes rights or protections that applicable law does not permit the parties to waive. If a provision is held unenforceable, the remaining provisions continue to apply to the extent permitted by law.
16. Changes and questions
Glen Mills may update these terms for future orders by posting a revised version. Updates do not retroactively change an accepted order unless agreed to in writing or required by law.
A waiver or modification must be expressly agreed to by Glen Mills in writing. A delay in exercising a right does not by itself waive that right. Obligations concerning payment, confidentiality, intellectual property and resolution of disputes continue after completion or termination to the extent their nature requires.
For questions about these terms, a quotation, payment or an existing order, contact Glen Mills.
Glen Mills220 Delawanna Avenue
Clifton, NJ 07014
973 777 0777
info@glenmills.com